Wall Insulation Solar Power Energy
Generation Guide
Wall Insulation Reducing Your Power Bills
By James J Dixon
Wall insulation in your home helps to save on your
power bills, having to use your air conditioning less
often in the summer, and reduce the need for heating
in the winter time. Arranging for insulation in your
walls helps to keep the heat out during summer, reduce
the escape of heat in the winter.
Before taking up the advantages of insulating your
home, you need to look for gaps in your walls where
heat enters and escapes from your home. You may need
a professional assessment to see if any repairs need
to be done to close these gaps, in order to maintain
the efficiency of the insulation.
Lowering the cost of your power bills is one of the
many advantages of wall insulation.
Reducing The Need For Air Conditioning And Heating
Hot weather means racking up on the air conditioning
bills, and cold weather means that you’re going to be
paying a lot to keep the heater on. It’s potentially
a lot of money down the drain (or ducts) when you’re
unsuccessfully trying to maintain thermoregulation.
When turning on all the fans and putting the air condition
on full blast, or turning up the heat and bundling up
in blankets and sweaters isn’t doing the job, you might
want to consider installing insulation in your house.
Keeping Out Heat In The Summer And Keeping In Heat
In The Winter
Wall insulation is a great way to keep out a lot of
heat in the summer, and keep in a lot of heat in the
winter because less heat is being transferred in and
out—it’s a win win situation.
But before you rush out to go buy some foam and fibers
and hire someone to install it, there are some factors
you have to consider. First of all, is wall insulation
going to be effective in your home?
Looking Out For Gaps
Unfortunately, it seems like insulation is the least
effective in helping homeowners that need it the most.
If there are big gaps that are letting a lot of heat
get in or go free, you can try to insulate but it won’t
be very effective.
If your house isn’t too full of gaps and reasonably
keeps out air, then insulation will work very well.
If your home qualifies as having wall insulation potential,
then next you have to consider factors like climate,
price, environmental impact and ease of installation,
because these will determine what type of insulation
material and method you choose to use—there will definitely
be a trade off.
Most Heat Resistant Is The Most Expensive
The material that will best insulate your house is
the kind that’s the thickest and densest because this
is the most heat resistant. However, this is also the
most expensive so you might have to compromise.
The basic types of wall insulation are loose fill,
batt and blanket, rigid board and spray foam. Batt and
blanket uses mineral fibers and is the cheapest form
of installation, but it can be difficult to install.
Rigid Board Is Very Thick
Loose fill and spray foam both fill in little empty
spaces and cracks using fibers or foam respectively,
and they cost more than batt and blanket. Rigid board
usually uses fiberglass, and it is very thick and insulating,
but it’s the most expensive type of wall insulation.
Each has its pros and cons that should be weighed before
going forth with the insulation installation procedure.
Finding More Information By Contacting Manufacturers
And Installers
You can search for more information, before you make
a final decision. One option is to ask plenty of information
from the manufacturers and the installers. The manufacturers
may point you to their web site, while the installers
may give you more practical information and final cost,
after installation.
You should contact at least two or three installation
companies, before you decide on the best quote. The
best quote is not always the cheapest and nor is the
most expensive. You may need to work out, which company
will give you the best quality of service.
Save On Your Power Bills
If you want to save on your power bills, you can use
insulation to stop the heat escaping out in winter and
stop the heat coming into your home in the summer. This
way you will save on heating and air conditioning. You
may find you do not need heating and air conditioning,
or you may need it for shorter periods, just heat up
the house in winter and cool down the house in the summer.
Another way to save on your power bills, is to generate
your own electricity with solar power, using sun energy
as your free source of energy. Once you pay for the
installation of a solar power system in your home, you
can generate free electricity to power up all your appliances,
turn on your lights and heat the water in your home.
Your power bills will show a dramatic decrease once
you arrange for the installation in your home, of a
solar power system and wall insulation.
About the Author:
James J Dixon has written a number of articles on recycling,
waste management and renewable resources including
Environmental Jobs,
Water Cycle Diagram.
Look out for new articles from this author, as they
become available on this site.
Little Known Solar Facts.....
What is the initial cost of switching over to
using alternate energy?
Switching over depends on
what exactly you are switching.
Houses that have to be retrofitted using solar
panels to generate electricity can be quite costly.
Vehicles are cheaper to retrofit but require work.
The costs can vary for anything switched over.
The best way to get an estimated idea is to seek
out a contractor or mechanic that is for using
alternate energy sources.
RECOMMENDED READING
|
|
|
|
| Copyright © 2007
- 2010 Solar Power Energy Generation, All Rights
Reserved |
|
